True Scale Rules....

Must Use H&R True scale Brass Chassis or older Protrack Brass Chassis

1. Any true scale 1/24 or 1/25 model kit or like hard plastic modern NASCAR body

2. Body cannot be chopped sanded shaved or modified in any fashon

3. Body must have painted 2 color 3D Driver  Or Blacked out windows

4. Body can be painted in any fashon but must have at least 3 numbers in NASCAR formation on the body

5. Tires must be Protack N 320 rear tires with matching fronts

6. Front tires can use a split or continuous axil and rotate independently if you wish

7. Motor must be a sealed Parma Death Star or Falcon 7

8. Body and chassis must provide enough clearens as not to drag on the track.

9. Chassis may be weighted and reinforced in any fashon, no drilling cutting or lightening is allowed

Flexi NASCAR RULES

 Legal modifications
1. Pin tubes or clips
2. Rear pillow block brace
3. Tape may be added for tuning
4. May add lead weight
5. May Solder in Motor, Rear Axle Bushings, Front Axle, and Bracing
6. May enlarge front axle upright holes to set axle height, but must still comply with track clearance rules.
7. Front wheels must rotate on their axle, May add camber to the front axle, front wheels must be mounted so as to contact the track surface as the car is rocked side to side, before grounding the chassis.
8. May run same manufactures lightweight replacement pan and Parma Hot Wing.
9. You may use a guide brace and gear guard, must not be made from wire
10. May run split front axles IE: Cheetah 11 3 piece chassis.
11. May tie 3 piece Cheetah 11 chassis together with a piece of piano wire
12. May replace bite bar

Clearance rules & dimensions
1. .050 chassis clearance
2. .815 Max tire width
3. 3.25 Max chassis width
4. No hollow axles front or rear
5. Brass or Bronze bushings only all classes
6. .047, .055, .0625, 3/32 front axle
7. Plastic spur gears only
8. 5/8 front wheels

legal bodies...

Any .010 Lexan Painted NASCAR body

Body can be painted in any fashon but must have at least 3 numbers in NASCAR formation on the body

Body Must include 3D 2 color Painted interior

Motor rules

Unopened, unmodified falcon 7, hawk 7 & proslot 4002b W/SEAL.

Flexi GTR RULES

Legal modifications

1. Pin tubes or clips
2. Rear pillow block brace
3. Tape may be added for tuning
4. May add lead weight
5. May Solder in Motor, Rear Axle Bushings, Front Axle, and Bracing
6. May enlarge front axle upright holes to set axle height, but must still comply with track clearance rules.
7. Front wheels must rotate on their axle, May add camber to the front axle, front wheels must be mounted so as to contact the track surface as the car is rocked side to side, before grounding the chassis.
8. May run same manufactures lightweight replacement pan and Parma Hot Wing.
9. You may use a guide brace and gear guard, must not be made from wire
10. May run split front axles IE: Cheetah 11 3 piece chassis.
11. May tie 3 piece Cheetah 11 chassis together with a piece of piano wire
12. May replace bite bar

Clearance rules & dimensions

1. .050 chassis clearance
2. .815 Max tire width
3. 3.25 Max chassis width
4. No hollow axles front or rear
5. Brass or Bronze bushings only all classes
6. .047, .055, .0625, 3/32 front axle
7. Plastic spur gears only
8. 5/8 front wheels

Legal bodies
Body Rules
** Must have 2 numbers and painted 2 color driver **
Bodies must be cut on cut line. No lowered or raked bodies. Rear of body may be cutout to within 1/4" of back edges or corners.
Jaguar, Cadillac & GTO will be allowed a 1/4" clear spoiler on the rear wing across the back only. Not on side plates of wing. The viper will be allowed a 1/2" spoiler. This allowance will be measured from the top of the molded wing and extra material can be used to attach spoiler.

Motor rules

Unopened, unmodified falcon 7, hawk 7 & Pro-Slot 4002b W/SEAL.

Flexi Can Am RULES

Legal modifications

1. Pin tubes or clips
2. Rear pillow block brace
3. Tape may be added for tuning
4. May add lead weight
5. May Solder in Motor, Rear Axle Bushings, Front Axle, and Bracing
6. May enlarge front axle upright holes to set axle height, but must still comply with track clearance rules.
7. Front wheels must rotate on their axle, May add camber to the front axle, front wheels must be mounted so as to contact the track surface as the car is rocked side to side, before grounding the chassis.
8. May run same manufactures lightweight replacement pan and Parma Hot Wing.
9. You may use a guide brace and gear guard, must not be made from wire
10. May run split front axles IE: Cheetah 11 3 piece chassis.
11. May tie 3 piece Cheetah 11 chassis together with a piece of piano wire
12. May replace bite bar

Clearance rules & dimensions

1. .050 chassis clearance
2. .815 Max tire width
3. 3.25 Max chassis width
4. No hollow axles front or rear
5. Brass or Bronze bushings only all classes
6. .047, .055, .0625, 3/32 front axle
7. Plastic spur gears only
8. 5/8 front wheels

Legal bodies
Any Vintage Can Am Style Lexan .010 Body With a 2 color Painted 3D Driver